Eckman 9ft 6in Electric Telescopic Branch Lopper Chainsaw

Product Information

Description

The Eckman long-reach telescopic chainsaw extends from 1.9m (6'3”) to a massive 2.9m (9'6”) and can cut through branches up to 8" in diameter.

The telescopic reach of almost 3 metres means most jobs can be tackled from the ground making it much safer than using a 'normal' chainsaw whilst standing on ladders.

Special Offer: Order the Eckman telescopic chainsaw and Eckman Telescopic Hedge Trimmer together for £149.90, and save an extra £10 (rrp: £249.90)

Features

• Specially designed padded hip brace and handle
• Fully adjustable shoulder strap
• High quality 'low kickback' Oregon bar and chain
• Cut up to 8inch (20cm) diamter branches
• Extends up to 2.9m (9'6")
• Can be shortened and locked to a minimum of 1.9m (6ft 2 ¾”)
• Powerful 850W motor
• Chain speed: of 11 metres/second
• Minimum noise, weight and vibration - allowing you to work for longer
• CE approved
• Free safety goggles included

FAQs

Q: Can I download instructions for this product?
A: Yes, you can download a PDF copy of the instructions for this product by clicking here

Q: Is there any assembly required before I can use the machine?
A: You’ll need to fit the Oregon Bar and Cutting Chain. Fitting the bar and chain should not take more than a couple of minutes and no special tools are required. The two mains things to ensure are; the chain is fitted with the cutters going in 
the correct direction and; the chain is properly adjusted so it is neither too tight nor too loose. Both are comprehensively covered in the instruction manual with easy to follow pictures. A screwdriver is also provided for final tension adjustment.  
The only other thing you will need to fit is the shoulder strap.

Q: What oil do I need and where can I buy it? What’s it for?
A: You’ll need to purchase a high grade oil specially designed for chainsaws. You can obtain this from all good DIY stores, garden machinery retailers or garden centres that also sell chainsaws. If you should decide to use any other kind of oil and you damage the machine (highly likely with continued operation), this will invalidate your guarantee. With the motor at full speed, the cutting chain operates at 11 metres per second. The friction between the chain and the bar creates extreme heat. The oil is needed to keep the chain properly lubricated and the heat to a minimum.

Q: How often will I need to check the chain tension?
A: A new chain will stretch so we suggest you re-check the tension after using for 10 minutes. If your first time use is considerably longer than this, re-check after every 10 minutes. After running for an hour or so, it is likely the chain has stretched to its maximum so we suggest in future you re-check the tension before and at the end of each use.

Q: How often will I need to check the oil level?
A: We can’t say exactly as this depends on how fast the engine is running. The faster the chain runs, the more oil will be used. This is automatically adjusted. The oil reservoir has a see-through window so it’s easy to keep an eye on the level when you are working.

Q: What is “kick-back” and how can I avoid it?
A: Kick-back happens when the tip or nose of the chain comes into contact with the wood and is specially noticeable if you are either not holding the machine correctly, or firmly enough. With experience, you can generally avoid kick-back even when cutting with the nose. Inexperienced users should avoid the nose coming into contact with the branch being cut and the instructions give good advice as to the correct method in cutting tree limbs.

Q: Do I need to wear a hard hat when working?
A: Just to be on the safe side, we highly recommend the use of wearing good protective clothing whilst using garden machinery. Whilst cutting high branches, if there is any possibility of the branch you are cutting falling onto your head, then it’s just sensible and good practice to wear a hard hat. Just use your common sense and definitely wear  the safety goggles provided to avoid sawdust getting into your eyes when cutting branches that are overhead.

Q: When my chain becomes blunt, can it be sharpened?
A: Yes. It’s a good idea to buy a simple chainsaw file and use it every time you use the saw. This should cost less than £5 from any good DIY store and used correctly, will keep your chain in top condition. A sharp chain means less effort and less effort means safer working. Alternatively, take the chain to any good garden machinery retailer and they will sharpen it for you.

Q: What is the padded hip brace for?
A: Instead of simply holding the branch lopper with both hands, in conjunction with the shoulder strap, if you rest the padded brace on your hip at the same time, your hip and back will take most of the weight of the machine and make pruning much less tiring. 

Customer Reviews

PRODUCT:
As good if not better than expected. Just a shame I had to buy chainsaw oil!!! Why don't you say that this is needed and sell it too?
graeme brooks, Southampton

PRODUCT:
Very useful piece of equipment worth the cost.
Martin O'Hanlon, Alnwick

PRODUCT:
happy with product
Linda Bower, Sheffield

PRODUCT:
It is an excellent product doing all it claims. My ownly reservation would be that it is very top heavy and so needs some strength to hold as you are preparing to use it. Once in place with strap on, and properly adjusted, it is fine.
Colin Gannaway, Dorchester

PRODUCT:
A little difficult to balance due to weight but overall very effective
simon crawshaw, Newton Abbot

PRODUCT:
Very pleased with the chainsaw.
susan fellows, Malvern